Product Center

BA860 Hand-Push Floor Scrubber

BA860 Hand-Push Floor Scrubber

BA860

TerraScrub BA860BT dual-brush walk-behind floor scrubber cleans 4,200 m²/h with 860mm brush path. 95L/105L tanks, self-propelling, 200Ah battery. 2×560W brush motors, 300kg. Also available as BA660BT with 660mm width. Contact for quote.
Function
Parameters
Related Downloads

Function

Product Overview

The TerraScrub BA860 is a fully automatic walk-behind floor scrubber that takes the effort out of heavy-duty cleaning. It is equipped with two brush discs, a self-propelling traction system, and dual motors — one for each brush — so the machine does the work instead of the operator. It covers 4,200 square metres per hour with an 860mm cleaning width, making it the right choice for large warehouses, industrial plants, and distribution centers that need to clean 10,000 m² or more in a single shift.

Unlike smaller hand-push models where the operator provides the forward motion, the BA860 has a 500W traction motor that drives the machine forward at a consistent speed. The operator just steers. This matters when you are pushing 300 kg of machine across a warehouse floor for four hours straight. The self-propelling system turns a physically demanding job into a manageable one.

Two variants are available. The BA860BT has an 860mm cleaning width and 4,200 m²/h efficiency for the largest facilities. The BA660BT scales the same design down to a 660mm width and 3,600 m²/h for medium-sized spaces that still need the dual-brush and self-propelling features but do not have the floor area to justify the full 860mm model. Both share the same 95L clean water tank, 105L recovery tank, and 200Ah battery.

Key Features

🪣Large-Mouth Sewage Tank with Visual Operation

The 105L recovery tank has a wide opening so you can see inside and clean it properly after each shift. No narrow necks that trap debris or make rinsing difficult. A maintenance supervisor in Georgia told us this design cut his tank cleaning time from 15 minutes to under 5.

🔧Adjustable Squeegee Rubber Edges with Flexible Direct Wheel

The squeegee rubber edges, inclination angle, and pressure are all adjustable. A flexible direct wheel supports the squeegee assembly, keeping it stable at different speeds and on uneven floors. This means better water pickup and fewer streaks left behind on rough concrete surfaces.

🚜Self-Propelling Function — No Pushing Required

The 500W traction motor drives the machine forward automatically. The operator steers and controls the speed, but the machine does the heavy pushing. At 300 kg, this machine would be exhausting to operate without self-propelling. With it, one operator can clean for a full shift without the muscle fatigue that comes from pushing a heavy scrubber manually.

🔩Auto Brush Lift & Triangle Buckle Mount

The dual brush discs use a self-developed triangular buckle design that lifts and lowers automatically. Each brush disc has its own 560W motor, so both spin at full power regardless of floor resistance. Swapping brushes takes less than two minutes per disc, and you do not need any tools. The same mount fits multiple brush types for different floor surfaces.

🔧All-in-One Design — Easy to Disassemble and Repair

All components are built into an integrated frame that can be disassembled, repaired, and maintained without specialized tools. When a motor or pump needs replacement, the modular design means you can swap the part rather than sending the whole machine to a service center. This keeps downtime and repair costs under control.

🔋200Ah Maintenance-Free Battery

The BA860 runs on a 24V/200Ah maintenance-free lead-acid battery — double the capacity of standard 100Ah units. This provides 5-6 hours of continuous operation, which at 4,200 m²/h covers roughly 21,000-25,000 m² on a single charge. The battery is fully sealed — no water level checks or acid maintenance needed.

Two Variants — Which One Fits Your Facility?

🚜BA860BT — 860mm Wide, Maximum Coverage

The full-size model with an 860mm cleaning width and 4,200 m²/h efficiency. Dual 560W brush motors, 500W traction motor, 95L/105L tanks. Weighs 300 kg. Best for large warehouses, industrial plants, distribution centers, and any facility cleaning 10,000+ m² per shift.

🚜BA660BT — 660mm Wide, Medium Coverage

A scaled-down version with a 660mm cleaning width and 3,600 m²/h efficiency. Same dual-brush design, same self-propelling system, same 95L/105L tanks. Weighs 295 kg. Best for medium-sized facilities that need the dual-brush and self-propelling features but do not have the floor space or doorway width for the 860mm model.

Ideal Applications

🏭

Industrial Plants

Dual brushes handle heavy grime and oil on factory floors with consistent pressure

📦

Distribution Centers

Self-propelling drive covers long warehouse aisles without operator fatigue

🛒

Large Supermarkets

860mm width cleans wide aisles and stock rooms in fewer passes

🏢

Commercial Complexes

Large tanks handle multi-building cleaning routes without frequent refills

Frequently Asked Questions

Q: How much floor area can the BA860 clean in one hour?
A: The BA860BT covers approximately 4,200 m² per hour (about 45,200 ft²/h). A large distribution center with 15,000-20,000 m² of floor space can be cleaned in roughly 4-5 hours on a single charge. The BA660BT covers 3,600 m²/h for medium-sized facilities.
Q: How long does the BA860 battery last on a single charge?
A: The 24V/200Ah maintenance-free battery provides 5-6 hours of continuous operation. At 4,200 m²/h, that covers roughly 21,000-25,000 m² on a single charge. The 200Ah capacity is double that of standard 100Ah units, which is necessary for large facilities that cannot afford charging downtime mid-shift.
Q: Does the operator have to push the machine?
A: No. The BA860 has a 500W self-propelling traction motor that drives the machine forward automatically. The operator steers and controls the speed, but the machine does the pushing. At 300 kg, this feature is essential for operator comfort and productivity during long shifts.
Q: Should I choose the BA860BT or the BA660BT?
A: Choose the BA860BT if you have large open areas, wide aisles, and need maximum coverage per hour. Choose the BA660BT if your doorways or aisles are narrower than 900mm, or if your facility is medium-sized and the 860mm width would be overkill. Both have the same dual-brush system, self-propelling drive, and tank capacity.
Q: How much does the tank hold?
A: Both variants share the same tanks: 95L clean water (25 gallons) and 105L recovery (28 gallons). At typical flow rates for heavy-duty cleaning, one tank fill covers about 3,000-4,000 m² of floor area before you need to refill and empty.
🔧

Related Accessories

Professional Floor Scrubbing Brush

High-quality scrubbing brush

Parabolic Squeegee Blade

High-efficiency water recovery

Water Tube
Durable water hose

📦 Standard Accessories Included

Main Unit x1
Battery Charger x1
Main Brush Assembly x1
Operation Manual x1


Parameters

Technical Specifications

SpecificationBA860BTBA660BT
Power TypeBattery (24V / 200Ah)Battery (24V / 200Ah)
Cleaning Width860 mm (34 in)660 mm (26 in)
Squeegee Width1,100 mm (43.3 in)1,080 mm (42.5 in)
Cleaning Efficiency4,200 m²/h (45,200 ft²/h)3,600 m²/h (38,750 ft²/h)
Traction Power500W (0.67 HP)500W (0.67 HP)
Brush Motor560W × 2 (0.75 HP × 2)560W × 2 (0.75 HP × 2)
Suction Motor500W (0.67 HP)500W (0.67 HP)
Lifting Motor100W (0.13 HP)100W (0.13 HP)
Clean Water Tank95L (25 gal)95L (25 gal)
Recovery Tank105L (28 gal)105L (28 gal)
Machine Size150cm × 95cm × 124cm143cm × 76cm × 118cm
Machine Weight300 kg (661 lb)295 kg (650 lb)
Model Selection Guide

Not sure which variant to pick? Here is a quick comparison:

Choose BA860BT You have large open areas, wide aisles (1,000mm+), and need to clean 10,000+ m² per shift. The 860mm cleaning width and 4,200 m²/h efficiency maximize coverage and minimize operator hours. Best for warehouses, industrial plants, and large distribution centers.
Choose BA660BTYour doorways or aisles are narrower than 900mm, or your facility is medium-sized and the 860mm width would be overkill. The 660mm width still delivers dual-brush performance and self-propelling convenience at 3,600 m²/h. Slightly lighter at 295 kg.

Not sure which BA860 variant fits your facility?

Tell us about your floor area, aisle widths, doorway dimensions, and daily cleaning schedule. We will help you decide between the 860mm BA860BT and the 660mm BA660BT — no obligation.


Related Downloads

The following is the information related to this product:

Message Inquiry

*
*
*
*
验证码
*
Submit