Product Center

BA680 Hand-Push Floor Scrubber

BA680 Hand-Push Floor Scrubber

BA680

TerraScrub BA680BT hand-push floor scrubber cleans 2,200 m²/h with 530mm brush path. 68L/70L tanks, auto full-tank alert, 100Ah battery. 550W brush motor, 190kg. Ideal for small and medium-sized commercial spaces. Also available as BA690BT with traction drive. Contact for quote.
Function
Parameters
Related Downloads

Function

Product Overview

The TerraScrub BA680 is a battery-powered walk-behind floor scrubber built for small and medium-sized commercial spaces. It covers 2,200 square metres per hour with a 530mm brush path, which is enough for supermarkets, office buildings, warehouses, and retail stores that need reliable daily cleaning without the complexity of larger machines.

The BA680 is flexible to operate and easy to manoeuvre. It scrubs and dries in a single pass, so the floor is ready for foot traffic almost immediately. This matters in busy environments where closing off areas for long drying times is not practical.

Two variants are available. The BA680BT is a standard hand-push model — the operator provides the forward motion, which gives precise control around obstacles and tight corners. The BA690BT adds a 400W traction motor that drives the machine forward automatically, reducing operator fatigue on long cleaning runs and boosting efficiency to 2,400 m²/h. Both share the same 68L clean water tank and 70L recovery tank.

Key Features

🛡️Heavier Aluminum Brush Cover — Easy to Clean

The brush cover is made from thicker aluminum alloy that is easier to wipe down and keep clean than plastic housings. It also resists warping from heat and impact, which means the cover stays flat and does not rattle after years of use.

🔩Cast-Aluminum Water Recovery

The one-piece cast-aluminum water recovery assembly resists corrosion from cleaning chemicals and moisture better than plastic components. It holds up in daily commercial use, especially when you are running acidic or alkaline cleaners on industrial floors.

⚠️Auto Full-Tank Alert & Shutoff

When the 70L recovery tank reaches capacity, the machine pops up a warning and shuts off automatically. No overflow surprises, no water damage to the motor. The operator gets a clear signal to empty the tank and keep going. A facility manager in Ohio told us this feature alone saved him from two motor replacements in the first year.

🔧Auto Brush Lift & Triangle Buckle Mount

The brush disc uses a self-developed triangular buckle design that lifts and lowers automatically. Swapping brushes takes less than two minutes, and you do not need any tools. The same mount works with multiple brush types so you can switch between soft and hard bristles depending on the floor.

🪣Large-Capacity Tanks for Long-Term Cleaning

The 68L clean water tank and 70L recovery tank handle larger cleaning areas without constant refilling. A facility manager in Texas told us his crew used to stop three times per shift to refill their smaller machine. With the BA680, they cut that down to once. The tanks are sized for all-day cleaning on medium-sized sites.

🔋Maintenance-Free Battery

The BA680 runs on standardized maintenance-free lead-acid batteries. No water levels to check, no acid spills to worry about. Charge overnight and the machine is ready for the next shift. The battery provides consistent power across the full discharge cycle, so cleaning performance does not drop off as the charge runs down.

Two Variants — Which One Fits Your Facility?

🚶BA680BT — Hand-Push

The standard hand-push model. The operator provides the forward motion, which gives precise control around obstacles and tight corners. Best for facilities with lots of furniture, displays, or narrow aisles where you need to steer carefully. Cleans 2,200 m²/h. Weighs 190 kg. No traction motor.

🚜BA690BT — Traction Drive

Adds a 400W traction motor that drives the machine forward automatically. The operator just steers — no pushing required. Reduces operator fatigue on long cleaning runs and boosts efficiency to 2,400 m²/h. Best for larger open areas like warehouses and wide supermarket aisles. Weighs 196 kg.

Ideal Applications

🛒

Supermarkets

Handles wide aisles, checkout areas, and stock rooms with consistent drying

🏢

Office Buildings

Quiet enough for daytime cleaning in open-plan offices and corridors

🏭

Light Warehouses

530mm brush path covers warehouse floors efficiently without the bulk of a ride-on

🏫

Schools & Universities

Large tanks handle hallways, cafeterias, and gymnasiums in fewer passes

Frequently Asked Questions

Q: How much floor area can the BA680 clean in one hour?
A: The BA680BT covers approximately 2,200 m² per hour (about 23,700 ft²/h). The BA690BT with traction drive reaches 2,400 m²/h (about 25,800 ft²/h). A medium-sized supermarket with 4,000-5,000 m² of floor space can be cleaned in roughly 2 hours.
Q: How long does the BA680 battery last on a single charge?
A: The 24V/100Ah maintenance-free battery provides 3-4 hours of continuous operation. At 2,200 m²/h, that covers roughly 6,600-8,800 m² on a single charge. The battery is fully sealed — no water level checks or acid maintenance needed.
Q: What happens when the recovery tank is full?
A: The BA680 has an auto full-tank alert. When the 70L recovery tank reaches capacity, a warning pops up and the machine shuts off automatically to prevent overflow. The operator empties the tank, and the machine is ready to resume. This protects the suction motor from water damage.
Q: Should I choose the hand-push BA680BT or the traction-drive BA690BT?
A: Choose the BA680BT if your facility has lots of tight spaces, obstacles, or narrow aisles where you need precise steering control. Choose the BA690BT if you have larger open areas like warehouses or wide supermarket floors where the traction drive reduces operator fatigue and boosts speed by 9%.
Q: How much does the tank hold?
A: Both variants share the same tanks: 68L clean water (18 gallons) and 70L recovery (18.5 gallons). At typical flow rates, one tank fill covers about 1,500-2,000 m² of floor area before you need to refill and empty.
🔧

Related Accessories

Professional Floor Scrubbing Brush

High-quality scrubbing brush

Parabolic Squeegee Blade

High-efficiency water recovery

Water Tube
Durable water hose

📦 Standard Accessories Included

Main Unit x1
Battery Charger x1
Main Brush Assembly x1
Operation Manual x1


Parameters

Technical Specifications

SpecificationBA680BTBA690BT
Power TypeBattery (24V / 100Ah)Battery (24V / 100Ah)
Cleaning Width530 mm (21 in)530 mm (21 in)
Squeegee Width770 mm (30 in)770 mm (30 in)
Cleaning Efficiency2,200 m²/h (23,700 ft²/h)2,400 m²/h (25,800 ft²/h)
Traction Power400W (0.54 HP)
Brush Motor550W (0.74 HP)550W (0.74 HP)
Suction Motor500W (0.67 HP)500W (0.67 HP)
Clean Water Tank68L (18 gal)68L (18 gal)
Recovery Tank70L (18.5 gal)70L (18.5 gal)
Machine Size125cm × 65cm × 111cm125cm × 65cm × 111cm
Machine Weight190 kg (419 lb)196 kg (432 lb)
Model Selection Guide

Not sure which variant to pick? Here is a quick comparison:

Choose BA680BTYou need precise control around obstacles, your facility has narrow aisles or lots of furniture, or you prefer a lighter machine (190 kg). The hand-push design gives you full control over speed and direction in tight spaces.
Choose BA690BT You have larger open areas, your operators cover long distances per shift, or you want to reduce physical fatigue. The 400W traction drive boosts efficiency to 2,400 m²/h and does the pushing for you. Slightly heavier at 196 kg.

Not sure which BA680 variant fits your facility?

Tell us about your floor layout, daily cleaning area, and whether you have tight spaces or open floors. We will help you decide between the hand-push BA680BT and the traction-drive BA690BT — no obligation.


Related Downloads

The following is the information related to this product:

Message Inquiry

*
*
*
*
验证码
*
Submit